Merwede kruiser 1000 now in the online auction. everyone can bid until 24 November 2025.
Merwede Cruiser 1000 – Steel Motorboat with Aft Cabin from 1975
The Merwede Cruiser 1000 is a steel motorboat with a length of 10 meters and a width of 3.15 meters. This cruiser was built in 1975 and has been in long-term private ownership since then. The boat is designed for use on inland waterways, canals, lakes, ponds, and rivers. The hull is constructed in a chine form, which contributes to the sailing characteristics and stability. The clearance height is 2.40 meters, making the boat suitable for a wide range of sailing areas with low bridges. The draft is 90 centimeters.
Merwede Cruiser 1000 now in the online auction. Everyone can bid until November 24, 2025.
Layout and Accommodation
The Merwede Cruiser features an aft cabin with two fixed berths. In the salon, there is a dining area where the table can be lowered to create an additional double bed. Additionally, there are two fold-out beds, bringing the total to six berths. The standing height inside is 1.78 meters. The accommodation is equipped with an electric toilet connected to an 80-liter waste tank. The water tank has a capacity of 175 liters. For comfort on board, there is hot air heating available.
The galley is equipped with a stove and a compressor refrigerator that was installed three years ago. Mattresses are present in the sleeping quarters. The boat is set up for longer stays on board, such as vacations and weekend trips.
Engine and Technology
The Merwede Cruiser is equipped with a Deutz TD2009 L04 engine with a power of 110 hp. This four-cylinder diesel engine was installed in 2007 and has since clocked 2,685 operating hours. The engine is electrically started and consumes an average of 2 liters of diesel per hour. The fuel tank has a capacity of 350 liters. The cruising speed is around 10 km/h, with a maximum speed of approximately 14 km/h.
The boat is equipped with various instruments, including a fuel tank gauge, oil pressure gauge, temperature gauge, and tachometer. Electricity on board is supplied via an alternator, inverter, shore power connection, and solar panels. There are four batteries with a total capacity of 480 Ah.
Equipment and Deck Gear
On deck, the boat is equipped with a bimini, fenders and lines, a stainless steel guardrail, and a swim platform. There are two anchors present, attached with chain and operated with a manual windlass. A swiveling stainless steel bike rack for two bikes is mounted on the aft deck. The bimini was installed two years ago. For safety, a lifebuoy is on board.
Maintenance and Documentation
The boat was last taken out of the water for maintenance in 2023. In the same year, the antifouling treatment was also carried out. Documentation of the engine replacement in 2007 is available. The boat is not registered, but the VAT has been paid. No known defects have been reported.
Usage and Sailing Experience
The current owner has had the boat for over 30 years and used it for pleasure cruising, vacations, and longer stays on board. Over the years, the boat has been used on various inland waterways, including canals, ditches, lakes, and rivers. The sailing experience is described as stable. The boat is suitable for both short trips and longer stays on the water.
Additional Information for Sale
Upon sale, all household items and other belongings on board will be included, as well as some paint. The boat is offered without a trailer. The weight of the boat is approximately 8,000 kilograms.
Summary
The Merwede Cruiser 1000 is a steel motorboat with a classic appearance and a practical layout. With an aft cabin, multiple berths, and amenities such as heating, solar panels, and a recent refrigerator, the boat is set up for comfortable stays on board. The Deutz engine from 2007 provides sufficient power for trips on inland waterways. The boat is suitable for water sports enthusiasts looking for a spacious cruiser with a long usage history and functional equipment.
